Unboxing of the Benchmade Griptilian 551 Knife

Up until a few months ago, I typically carried a Gerber Paraframe I knife as my EDC (Every Day Carry), but then I lost it… somehow. To be honest though, before getting the Gerber (about 2 years ago) I had never really carried a knife on me, so when I lost it, I was ok for a while. However, after losing it, I did still find myself reaching for my knife to do everyday things, such as opening the mail or cutting into packages that came in the mail. Needless to say, I came up empty-handed each time…

Then on a recent hike with Brian Green and Gizmo Joe I listened to both of them go through what I considered pretty serious knife talk… this, along with my new-found, often empty hand, made me start thinking about picking up another knife to replace my Gerber, at least for an EDC. (I carry a Ka-Bar Mini Dozier when backpacking.)

A while back I had come across the Benchmade Griptilian knives, but to be honest, the price turned me off, pretty quick. However, after listening to both Brian and Joe talk about their own Griptilian’s, I decided to give them another look. Then, long story short, I found one on Amazon for $78 + free shipping. It just so happened that I had that amount of $$ to spend on “backpacking gear,” so I thought to myself, why not?

So, I ordered it!

Since I ordered the Griptilian, I have watched multiple YouTube videos as well as read lots of different reviews on this knife… all in anticipation of its arrival. Then… it finally came in the mail today!

As I said already, I have never really carried an EDC knife with me until just a couple of years ago, so it is safe to say, I am not a huge knife critic. To be honest, at this point, I cannot break down all the aspects of a knife, the materials it is made from and the scales that are used to compare them by. So, rather than try to break it all down, I will simply post some of the details from the website and the features that stood out to me.

  • Handle: NORYL GTX®: A modern engineered plastic offering high-strength, minimal flex and optimally lightweight properties. Molded to form.
  • There is a hole for a lanyard included in the handle (although, I will not use this).
  • 420J stainless steel liners.
  • Reversible carry-clip.
  • Locking Mechanism: AXIS® A patented Benchmade exclusive, AXIS® has been turning heads and winning fans ever since its introduction. A 100-percent ambidextrous design, AXIS® gets its function from a small, hardened steel bar which rides forward and back in a slot machined into both steel liners. The bar extends to both sides of the knife, spans the liners, and is positioned over the rear of the blade. It engages a ramped, tang portion of the knife blade when it is opened. Two omega style springs, one on each liner, give the locking bar its inertia to engage the knife tang. As a result, the tang is wedged solidly between a sizable stop pin and the AXIS® bar itself. Available in manual, assist or automatic configurations.
  • Blade: 154CM: An American made premium grade stainless steel originally developed for tough industrial applications. Known for its best all-around qualities, it offers great corrosion resistance with good toughness and edge quality.
  • HRC: 58-60
  • Modified Drop Point.
  • Dual thumb-stud opener.
  • Measured Blade Length: 3.5 inches
  • Measured Handle Length: 4.5 inches
  • Total Opened Length: 8 inches
  • Measured Weight: 3.8 oz
  • Made in the USA

As well, here is an unboxing video that I made earlier today:

To be fair, with my level of understanding about many of the aspects involving any knife, it is hard for me to give a true evaluation of this knife. All that I can say is that I am happy to have it. As I said, after listening to Brian and Joe talk about this knife (an a few others), as well as all the reviews and videos I have come across on this knife, I feel like I have a quality product. Other than this, I can say that, without-a-doubt, this is the sharpest, out-of-the-box knife that I have ever owned. (I have been so impressed with this, I am now missing a fair amount of arm hair on my left arm…)

Now though, I just need to learn how to keep them sharp…

However, I can say that this knife feels good in my hands. It is actually a little bigger than I had imagined, but it turns out that when “gripping” (pun intended) the knife, it feels like a good fit. As well, the Axis locking mechanism is easy to use (although, it will take some more use for me to get smooth with it…) Thanks to this mechanism, it is quite easy for me to open and close the knife, even with one hand, and the blade “feels” locked tight when opened all the way. And I have already commented on how sharp it is…

As I mentioned in the video, I do have a mod planned for this knife. It is a simple one, although I have yet to do it (so sorry, no pictures just yet). I plan to remove the pocket clip and then to remove the black paint and then to polish it so that it has a simple stainless steel finish. Why, you ask? In many of the reviews and videos I came across when “researching” this knife, many had complained that the black paint chips off very easily and quite quickly, even with simple use. So, a number of reviewers have simply removed the black paint and then polished it up. This makes it a bit more “bling-y,” rather than the more appealing duller, black finish, but if it chips so easily, I would rather just skip to the end result. So, in the next few days, depending on work, I will work on getting this done and will post more on it then.

Also, I do not plan to use this knife as my backpacking knife. It is not that I think it would not be able to handle it (I feel like it would do just fine), but rather, I have a smaller, lighter weight Ka-Bar that I carry when backpacking, and it meets all of my requirements, and then some. So, for me, the Griptilian is way overkill for backpacking use. As I said at the beginning of this post, this will be my EDC knife for around home/work use. That said, I am quite certain that I have a very capable, worthy knife. Now I just have to make sure that I don’t misplace this one too…

Thanks for reading!


Disclaimer: I purchased this knife with my own, hard-earned money. It was not provided to me by anyone and I am not obligated to write a “review.” 




About Stick

My blog is essentially a record of my hiking career. Through it, I, and others, can see how I have evolved from a heavy weight backpacker, to a smarter, more efficient, lightweight backpacker. Through the use of video, still photos, and of course writing, one can see my progression, as well as check out some of the places I hike, and not to mention some cool, lightweight gear options. For me, my blog is a journal, but for others, I hope that it is an interactive learning tool to aid them in their own progression towards lightweight backpacking.
This entry was posted in Knives and tagged , , , , , , , . Bookmark the permalink.

9 Responses to Unboxing of the Benchmade Griptilian 551 Knife

  1. Love the idea of the rubber grip – I want to try this out too for my EDC.


  2. The Grip is an awesome folder, particularly for EDC. Great review!


  3. This is an awesome review, thanks for the vid and pictures almost no other reviews that I found were as detailed as this one. Why don’t you do affiliate work? I would buy your products


  4. Nice article ,good content and nice video describing all the features of this folding benchmade knives which can be carried anywhere safely.


  5. Brian Green says:

    I had no doubt that you’d like it. I actually carry the Mini Griptillian plain edge for my backup EDC (yes, I carry two knives) and find it to be the perfect size. Always wanted the full size big brother so curious to know how it works out for you once you’ve had more time with it. Great knife either way!


    • Stick says:


      I am pretty excited about it for sure…I have had it with me constantly… every once in a while I will pull it out of my pocket and just open and close it… 🙂

      Also, Smokeeater908 has me talked into a Spyderco Paramilitary 2… 🙂 and one of the Sharpmakers to keep them sharp…

      First though, I have got to get another camera…this one I have is not what I had hoped it would be…either that or I just don’t know how to use it…

      I still have my eye on the GF2… 🙂

      Thanks for stopping by!



  6. Gizmo Joe says:

    Really good post, you hit all the key points! Love my Grip. 550!


Leave Your Comment Here:

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.